Product

搜索
Search
All categories
Number of views:
0

Load Sensor

Synchronous control device: It is composed of main control box, sub-control box, sensor, remote control, and mobile phone monitoring terminal.
➤ The main control box controls the simultaneous lifting and lowering of the entire group of frame points;
➤ The sub-control box is responsible for controlling each lifting equipment, and the load signal is transmitted to the main controller in the main control box;
➤ The sensor is responsible for collecting the load value of each point in real time;
➤ The remote control is a manual control signal transmission device, which has the functions of starting, raising, lowering and stopping commands;
➤ The mobile phone monitoring terminal integrates data monitoring and function control, which can comprehensively monitor the operating status of the control system.
Retail price
0.0
Market price
0.0
Number of views:
0
Product serial number
Quantity
-
+
Stock:
0
Product Description
Parameters

The all-steel fabricated attached lifting scaffold is a new high-rise protective frame developed and promoted by our company in recent years. The all-steel assembly completely breaks the design concept and structural form of the traditional lifting frame, replacing the traditional scaffolding method of steel pipes and fasteners, replacing the steel pipe fasteners with steel frames, and replacing the traditional dense mesh nets with expanded metal. The traditional wood and bamboo scaffolding boards are replaced with shaped steel walkway boards, which improves the safety, reliability, sealing and aesthetics of the entire frame. It meets the requirements of safety, energy saving, low-carbon environmental protection and green construction advocated by the country, effectively resolves the safety management problems of high-rise exterior protection operations that government regulatory agencies and construction contractors worry about, and completely avoids the risks of high-altitude and suspended operations and fall accidents. .

Installation Sequence

01.Set in plain platform
02.Erect vertical post
03.Assemble assistant diagonal brace
04.Put on vertical post of first floor
05.Assemble plain platform of second floor
06.Mount guide rail
07.Remove assistant diagonal brace
08.Install diagonal brace
09.Fit in support frame
10.Put in stair
11.Fix safety screen
12.Put up formwork and start concrete pouring
13.Mount guardrail board
14.Fill guardrail board in edge gaps
15.Set up embedded part
16.First floor concrete pouring
17.Install wall bracket after formwork stripping
18.Complete first floor climbing scaffold assembly
19.Connect with second floor guard rail
20.Connect with second floor vertical post
21.Assemble second floor climbing scaffold
22.Mount lower hanger
23.Assemble third floor climbing scaffold
24.Put in guardrail boards on third floor
25.Mount wall hanger
26.Set up fourth floor climbing scaffold
27.Fix upper hanger
28.Put on elevation hoist
29.Put in load sensor
30.Install computerized control system
31.Open all guardrail board and ready for lifting
32.Position chain bracket and fix the bolt
33.Fasten hanger spring
34.Start lifting
35.Lift to the set position and remove bottom wall bracket
36.Continue lift to the construction floor
37.Move bottom wall-attached guardrail bracket to the top construction floor
38.Mount wall-attached chain hanger to next construction floor

 

Advantages

1.) Realize the function of low building and high use. It is assembled at the bottom of the main building at one time, attached to the building, and continuously improved with the increase of the floor height. The whole operation process does not occupy other cranes, which greatly improves the construction efficiency, and the site environment is more humane, and management and maintenance are easier. The effect of civilized operation is more prominent
2.) Reasonable structure design, adequate protection and excellent fire protection function. Easy to install and disassemble.
3.) Wide ranges of applications. Save 40%-60% labor, effectively solve the problem of shortage of construction personnel and increase of construction labor cost
4.) Wall attached device integrates anti-drop function, anti-tilt and guiding device. Good anti-falling and anti-tilting performance.
5.) Computerized control system offers an easy and clear on-site control management.
6.) The lifting adopts the intelligent load control system and remote control operation, which is more convenient and reliable, and realizes the operation without personnel on the shelf. Control system is designed with automatic overload alarm and stop functions.
7.) Additional benefits of advertising on metal screens
8.) Self-climbing scaffolding system, which includes support rails that can be fixed to the surface adjacent to the edge of the structure.

We could not find any corresponding parameters, please add them to the properties table
Leave Message

© COPYRIGHT 2021 ALL RIGHTS RESERVED            Terms and Conditions